Saturday, 23 September 2017

Lovely Brown Oak


At EWS there was a stall selling some lovely boards of quarter sawn brown oak. Although I have enough wood for the rest of my life, I just couldn't resist! Where the beetle infestation has only partially taken effect, it sometimes shows stripes of dark brown which is referred to as tiger oak in the trade. The stripes were even more pronounced on the other side of this 2" thick board, so the vast majority of this 0.8 cube slab (10 board feet in US) is fine useable wood. On enquiring as to the moisture content it was tested at 35%, so basically green. I have dated the board  and will have to wait at least two years before it can be used, but it will be worth it.


Thursday, 21 September 2017

Olliver Sparks Plane at EWS


Ollie Sparks had some of his beautiful planes on display at EWS including a small, numbered batch of miniature smoothers. Based on the rare Norris no 21 this is his interpretation.


Ollie cast the bronze body himself and even turned the bolts on his lathe.
The lovely infill is Honduran rosewood.


As usual the mouth is extremely tight and despite it's size is a very usable plane.
It is 3 1/2" long x 1 1/4" wide with a 1" blade bedded around 52 degrees.
This plane is mine but I believe Ollie has one left from the batch priced at £700 if anyone is interested.

Sadly I don't own an original Norris 21 but this A14 has a similar rear end and will give you a sense of scale.

Wednesday, 20 September 2017

Presents from the EWS show.


I was quite taken aback at the show to be given these lovely presents. The medjool dates came all the way from Israel, the bottle opener and beer from Dave Jeske from Blue Spruce. The expensive bottle of wine was handed to me in the middle of a dovetail demo so I didn't get a proper chance to say thanks.

Tuesday, 19 September 2017

European Woodworking Show


I had promised myself that I would have a good look round all the show, but as usual it didn't happen! Here is the main barn just before customers were let in and here's what happened afterwards.


So unfortunately I only have a few shots of those near to my stand.


Camera shy Phil Edwards from Philly planes, gotcha!


Bill and Sarah Carter with a fine selection of his wonderful planes as well as a few other rare antiques.

Ollie Sparks with a good selection of his master pieces. More on Ollie later.
And below Richard Arnold with lots of 18thC planes along with some very nice 21st interpretations made by himself. Richard gives his time very generously and is extremely knowledgeable.


Monday, 18 September 2017

Wonderful User Made Saws


With the EWS show finished I'm just trying to catch on the back log, pictures of the show will follow.
Slava, a good customer sent me these pictures of some lovely saws he has made. He started by refurbishing old saws and then got hooked, so he decided to start making his own.


This one is a long stroke (probably dovetail) saw with an early style handle in curly walnut



This one looks like a tenon saw with another early style (beech?) handle with beautiful spurs.



And lastly another tenon saw with more curly black walnut and a very pronounced hang (I think that's the correct term!)


Monday, 11 September 2017

European Woodworking Show 2017, this weekend!!!


Yes it's here at last, the biggest and best, quality hand tool show in the UK, maybe even the world!!
The setting is in and around the wonderful 12th C Cressing Temple Barns in Essex.
Tool makers and demonstrators from around the world will be attending and this is one show not to miss, especially as this is the last!
See pictures from the 2015 show here

http://www.europeanwoodworkingshow.eu/previous-shows/gallery-2015/

The show is open from 10.00 - 5.00 pm on Saturday 16th and 10.00 am - 4.00 pm on Sunday 17th.
Hope to see you there!

Tuesday, 5 September 2017

Great Table Design


Joe sent me these pictures of his latest project made for the 100% design show on 20th - 23rd September.

The tables are made from ash with a stained ash top with glass and are very versatile.




A short while ago I did a post showing Joes ash chest of drawers and here it is finished.



He used one of my 1:6 dovetail guides for the many dovetails and has done a great job.